大型軍事模型是為了滿足軍事教學基地的教學需求和科技館、軍事展覽館、歷史景區的展覽需求以及影視劇拍攝的布景需求而產生的模型設備。大型軍事模型主要包括坦克、裝甲車以及戰斗機、軍艦等軍事裝備，大小規模一般為1:1等比例還原，也可以按照客戶不同的需求做相應的擴大和縮小，做工優良、逼真是大型軍事模型在制作過程中的基本要求，而為了達到這些要求就需要有一套行之有效、科學嚴謹的制作步驟，源頭廠家現在就帶大家了解一下大型軍事模型的制作步驟。
A large-scale military model is a professional model equipment produced to meet the teaching needs of military teaching bases, exhibition needs of science and technology museums, military exhibition halls, historical scenic spots, and the setting needs of film and television dramas. Large military models mainly include tanks, armored vehicles, fighter jets, warships, and other military equipment. The size and scale are generally reduced in a 1:1 ratio, and can also be expanded or reduced according to different customer needs. Excellent workmanship and professional realism are the basic requirements in the production process of large military models. To achieve these requirements, a set of effective, scientific and rigorous production steps is required, The source manufacturer will now take you through the production steps of large-scale military models.
一、骨架的制作
1、 Skeleton production
接到客戶的訂單要求后，由設計人員進行大型軍事模型的設計，這是工人師傅的制作說明書。拿到圖紙之后，師傅們會根據圖紙將所需要的不同長度的50mm50mm*2.0mm的方鋼裁切出來，然后將其焊接成為大型軍事模型的骨架。
After receiving the customer's order request, the designer first designs the large military model, which is the production manual of the worker master. After receiving the drawings, the masters will cut the required 50mm50mm * 2.0mm square steel of different lengths according to the drawings, and then weld them into the skeleton of a large military model.
圖為工人師傅在進行焊接工作
The picture shows the worker master performing welding work
二、對骨架進行鐵藝蒙皮
2、 Iron skinning of the skeleton
在骨架制作完成后，師傅們會根據骨架的平面分布，選擇合適大小的的2mm厚的鍍鋅板進行焊接蒙皮工作，并在鍍鋅板與框之間采用鉚接法連接，以確保大型軍事模型有足夠的強度和剛度。
After the skeleton production is completed, the masters will select 2mm thick galvanized plates of appropriate size for welding the skin based on the plane distribution of the skeleton, and use riveting method to connect the galvanized plates and frames to ensure that the large military model has sufficient strength and stiffness.
裝甲車軍事模型完成蒙皮工作圖
Armored vehicle military model completed skin working diagram
三、噴涂底漆膩子并打磨接縫
3、 Spray primer putty and polish joints
在鐵藝蒙皮環節結束后，涂抹適用于大型軍事模型的膩子，反復涂抹以達到理想的要求。等待膩子自然風干后，要在接縫處涂抹纖維材料并進行打磨，為了大型軍事模型表面的光滑平整，要用打磨機對膩子進行打磨。
After the completion of the ironwork skinning process, apply professional putty suitable for large military models and repeat the application to achieve the desired requirements. After waiting for the putty to air dry naturally, fiber material should be applied to the joints and polished. In order to ensure the smooth and flat surface of large military models, a polishing machine should be used to polish the putty.
坦克軍事模型完成涂抹膩子工作圖
Tank military model completed applying putty working diagram
四、噴涂外觀并完善細節
4、 Spray appearance and improve details
更后，根據客戶的具要求，采用汽車漆對大型軍事模型的外觀進行噴繪，可根據需求噴涂字樣和logo，并調節相應的細節。
Finally, according to the customer's requirements, the exterior of the large military model can be sprayed with car paint, and the words and logo can be sprayed according to the needs, and the corresponding details can be adjusted.
本文由
大型軍事模型友情奉獻.更多有關的知識點擊:
http://我們將用真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is a friendly contribution from a large-scale military model. For more relevant knowledge, click on: http:// We will provide you with comprehensive services with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned
