航空飛機模型主要材料包括（樹脂、塑料、合金及新型復合材料）四大部分，規格從40米30厘米不等，各種機型比例齊全。由于航空機械模型材料的細節，維修航空機械模型配件和檢查是必不可少的，針對造成的損壞，修復損壞的部件，檢查氣動噴射器的所有部件是否泄漏和具體措施用例。下面來講講相關內容吧。

The main materials of the aircraft model include four parts (resin, plastic, alloy and new composite materials), with specifications ranging from 40m to 30cm, and a complete range of models. Due to the details of the aircraft mechanical model materials, it is essential to repair the aircraft mechanical model parts and inspect them. In view of the damage caused, repair the damaged parts, and check whether all parts of the pneumatic ejector have leakage and specific measures. Let's talk about the relevant content.

大多數飛機由五個主要部分組成：機翼、機身、尾翼、起落裝置、和動力裝置。普通人對飛機了解一般從網上圖片看到，或者通過展覽展會、航模展、主題館、游樂場等地方。對真機的接觸多也就是坐飛機的時候感受下。上海霖立實業備，1：1殲10飛機模型、殲15飛

Most aircraft consist of five main parts: wings, fuselage, tail, landing gear, and power plant. Ordinary people usually know about aircraft from online pictures, or through exhibitions, model aircraft exhibitions, theme pavilions, amusement parks and other places. I have a lot of contact with real aircraft, that is, I feel it when flying. Shanghai linli industrial equipment, 1:1 J-10 aircraft model, J-15 flight

航空機械模型易碎且容易干燥，因此模型需要將水貼在包裝食品包裝的地方長時間存放。放入冰箱等即可取出。如果水貼開裂，可以用模型漆稀釋噴水貼，多次重復噴涂即可修復。

The aeromechanical model is fragile and easy to dry, so the model needs to be pasted with water at the place where the packaged food is packaged for a long time. Put it into the refrigerator and take it out. If the water paste is cracked, the water spray paste can be diluted with model paint and repaired by repeated spraying.

對于損壞氣管的更換，航空機械模型的跟蹤檢測有幾個重要的部分：頂部凸出的引入，而對面件的作用是保證模型打開、關閉活動和塑件頂部凸出，如果航空機械模型的任何部分損壞和粘連會導致停止，所以要經常保持模型頂針和潤滑導柱，并定期檢查頂針和導柱是否變形和表面損壞。

For the replacement of the damaged air pipe, the tracking and detection of the aircraft mechanical model has several important parts: the introduction of the top bulge, and the function of the opposite part is to ensure the opening and closing activities of the model and the top bulge of the plastic part. If any part of the aircraft mechanical model is damaged and adhered, it will stop. Therefore, it is necessary to keep the model thimble and lubricate the guide pillar frequently, and regularly check whether the thimble and guide pillar are deformed and surface damaged.

大型航空模型制作人員認為一經發現，應及時更換；生產周期完成后，對航空機械模型表面、機芯、涂層覆蓋的油面零件進行工作，特別要注意上齒輪、軸承零件和彈簧力學模型的抗拉強度的保護，以確保它們始終處于工作狀態。

Large scale aviation model makers believe that once found, they should replace it in time; After the completion of the production cycle, work on the surface of the aircraft mechanical model, the movement and the oil surface parts covered by the coating. Pay special attention to the protection of the tensile strength of the upper gear, bearing parts and spring mechanical model to ensure that they are always in the working state.

隨著生產時間的推移，冷卻道容易沉積水垢和鐵銹和泥土以及一種藻類，使冷卻道的橫截面變量小，冷卻通道變窄，冷卻液和模型直間的熱交換率大大降低，增加了企業的生產成本，所以要注意通道的清潔；對于熱回路的航空機械模型，加熱和控制系統的維護以防止故障的發生尤為重要。

With the passage of production time, the cooling channel is easy to deposit scale, rust, soil and a kind of algae, which makes the cross-section variable of the cooling channel small, the cooling channel narrow, the heat exchange rate between the coolant and the model is greatly reduced, and the production cost of the enterprise is increased. Therefore, pay attention to the cleaning of the channel; For the aeromechanical model of thermal loop, the maintenance of heating and control system is particularly important to prevent failure.

希望以上所講可以幫助到您，更多相關的信息您可以來關注我們網站http://，聯系客服人員，為您講解更多更為詳細的內容或者問題，讓您在此有所獲?。?/div>